Xbee 1mW U.FL Connection


This Product Has Been Discontinued, This Page Is For Reference Only.

22.95 USD
$22.95 ea.

These modules allow reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Description [Hide]

This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set.


  • 3.3V @ 50mA
  • 250kbps Max data rate
  • 1mW output (+0dBm)
  • 300ft (100m) range
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set


Documentation [Hide]

You Might Also Like [Hide]


Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD


Solarbotics Synapse-XBee Adapter Kit

Ever want to change the species of your RF modules? Now you can evolve your XBees into Synapses! Well that doesn't really make sense but, hey, it doesn't change the fact that you can now do it with this kit!

$7.50 USD


Male 10-pin Headers-2mm spacing

With electronics, there's connections, which usually means sockets and pins.This header strip fits into any socket strip designed for Xbees.

$0.57 USD


7-Segment Serial Display - Blue

The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The display will give you full control of all digits, decimal points, the colon and the apostrophe.

$12.95 USD


8 Position Terminal Block 0.137 Spacing

Want to lock down heavier gauge wires down semi-permanent fashion? Here's a 8-position terminal block with 0.137" (3.5mm) spacing.

$1.67 USD


Vibrating Disk Motor

The VPM2 is a replacement for the now unavailable venerable VPM. At 12mm dia x 3.4mm thick, it's smaller than the original, and has presoldered leads!

$3.95 USD


ST2 100 x 80mm, Strip-board solder protoboard

It doesn't get more standard than a large, traditional stripboard for soldering your experiments!

$5.66 USD


RF Link Receiver - 4800bps (315MHz)

These wireless receivers work with 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

$4.95 USD


2.5mm Plug/Jack Power Adapter set

It's a pain to solder up barrel jacks and sockets, so these screw-terminal based versions are very popular for repurposing DC power supplies to other applications!

$3.50 USD


4.3M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!