5V 200mA Step-Up Boost converter

50647

$5.95

USD

Qty
Price
1
$5.95 ea.
2+
$5.95 ea.

The NCP1402 is a 5V Step-up DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low ripple 5V output capable of sourcing up to 200 mA.


Description [Hide]

This board is great for supplying power to 5V sensors on a 3.3V board, or providing 5V from a AAA battery. While this board won't be good for charging your phone, it would be great for powering a microcontroller development board under a small load.

The breakout board includes all of the necessary peripheral components. The input, output and ground pins are broken out on a 0.1" grid to allow easy access on a breadboard. This board could be used in place of a voltage regulator if needed as it shares a similar pinout to a LM1084 regulator all you need to do is put a small voltage into the input on one side, ground connection on the other side and then you'll get 5V out the center pin. Ground reference is shared between input and output.

 

 

Documentation [Hide]

Related Products [Hide]

50846

Concave Button

Got an application needing a button you can POUND on? This 35mm concave momentary push button is quite like the ones you find on arcade games.

$1.95 USD



21035

Breadboard Jumper Wire Bundle

This 70-piece flexible wire jumper kit is sure to replace your old-style solid-wire jumpers. These are more flexible, robust, and easy to use!

$6.00 USD



50646

SparkFun Dual Motor Driver TB6612FNG

Need a tidy, simple, and capable motor controller? The SparkFun breakout board featuring the Toshiba TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).

$8.95 USD



34020

Breadboard Voltage Regulator Kit

The BVR Breadboard regulator kit makes it easy to add regulated, switchable power to your breadboard by using practically any 2.1mm DC adapter!

$5.95 USD



20950

SMTpads-Size1, 80x50mm, 200x100mil Pads, SMT Solder protobrd

For REALLY large SMD devices, the 200x100mil pads on this smaller protoboard will make construction much easier. Has ground plane on other side.

$3.75 USD



50840

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A

The iMax B6 Balance Charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. The B6 will balance charge LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.

$32.95 USD



17440

Barrel Power Jack socket, 2.1mm Connection

2.1mm barrel power jack socket. For connecting barrels, I mean "power leads"!

$1.00 USD



TR2222

PN2222 NPN Transistor

This NPN transistor is similar to the TR3904, but can deliver higher maximum current at better efficiency ratings.

$0.15 USD



GM24

Gear Motor 24 - 1:192 90 Degree Shaft

Call it a teeny, tiny little brother to the GM3 gearbox. With a suitably smaller appetite for power!

$4.25 USD



50725

Arduino Pro Mini 328 - 5V/16MHz

You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC. Oh... you want a reset, and voltage regulator too? Why didn't you say so!

$9.95 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!