RF Link 2400bps Receiver - 315MHz

50600

This Product Has Been Discontinued, This Page Is For Reference Only.

4.95 USD
Qty
Price
1
$4.95 ea.

This receiver type is good for data rates up to 2400bps and will only work with the 315MHz transmitter.


Description [Hide]

Sold as a receiver only. This receiver type is good for data rates up to 2400bps and will only work with the 315MHz transmitter. Multiple 315MHz receivers can listen to one 315MHz transmitter.

This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The receiver is operated at 5V.

We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a PIC, you have an instant wireless data connection. Data rates are limited to 2400bps. The typical range is 500ft for open area.

This receiver has a sensitivity of 3uV. It operates from 4.5 to 5.5 volts-DC and has digital output. The typical sensitivity is -103dbm and the typical current consumption is 3.5mA for 5V operation voltage.

Features:

  • 315 MHz Operation
  • 500 Ft. Range - Dependant on Transmitter Power Supply
  • 2400 bps transfer rate
  • Low cost
  • Extremely small and light weight

You Might Also Like [Hide]

29250

ESP8266 ESP-32

The much-anticipated ESP32 is here: Bluetooth, Wifi, Dual Core, IoT just became doable!

$7.95 USD

51045

Pololu Wixel Shield for Arduino

This Arduino shield interfaces the Pololu Wixel wireless modules to your Arduino-compatible project, enabling simple wireless programming, debugging, and control using standard Arduino software.

$12.95 USD

29240

ESP-12F AP+STA Remote Serial Port WIFI Controller / Module

The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a wifi bridge for your project)

$5.95 USD

51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD

60719

eSun 3mm PLA filament - 1kg Spool

eSun's 3mm PLA 3D printing filament is an excellent general purpose material with a great finish, very rigid and biodegradable. 1kg spool

$28.80 USD

M2.5x00-N

M2.5 Metric Hex Nut, Package of 10

M2.5 Hex Nuts, package of 10.

$2.00 USD

R5.6M

5.6M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

HS14x14x6G

Gold Anodized Aluminum 14x14x6mm Heat Sink with Adhesive

Use these peel-and-stick heat sinks to remove heat from sensitive ICs. Perfect for Raspberry Pi processors!

$1.00 USD

52092

Raspberry Pi NoIR Camera Board v2 - 8 Megapixels

8MP Camera without Infra Red Filter for Raspberry Pi

$39.95 USD

50891

3.7V 110mAh LiPoly battery for E-Textiles

What makes this battery special for E-textiles? Built-in current limiting for safety.

$6.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!