ProtoSnap Plus - LilyPad Kit SKU: 50495
ProtoSnap Plus – LilyPad Kit
$54.95 USD
LilyPad Development Board – Wearables design system
In stock
Description
The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically designed to make it as easy as possible to incorporate electronics into any of your garments or fabrics. The included LilyPad ProtoSnap Plus is a sewable electronics powerhouse that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. We have also included a USB cable, 110mAh LiPo battery, needle set, and two conductive thread bobbins. With all of these parts combined and the featured Activity Guide (found below), you will be able to plan and create fantastic projects in no time!
At the center of the ProtoSnap Plus is the LilyPad USB Plus microcontroller, pre-wired to a LilyPad board including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs and a LilyPad Slide Switch. Because these components are connected together on the ProtoSnap board, you can test out your project ideas before you sew. The ProtoSnap Plus also includes expansion ports that let you sew your wearables together or use alligator cables to easily connect external sensors and components. After testing out your coding ideas using the attached LilyPad pieces, you can break apart the prototyping board and sew them into your project!
Sparkfun Electronics has also written an online Activity Guide that teaches you how to program in Arduino with the LilyPad ProtoSnap Plus. This guide includes 10 example activities that use the pre-wired LilyPad boards on the LilyPad ProtoSnap Plus after you’ve completed the Hookup Guide linked below and in the Documents tab.
Please be aware that the Lilypad ProtoSnap Plus Kit is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s.
Included on the Board:
- 1x LilyPad USB Plus
- 1x LilyPad Light Sensor
- 1x LilyPad Buzzer
- 1x LilyPad Button
- 1x LilyPad Switch
- 2x LilyPad LED — Yellow
- 2x LilyPad LED — Red
- 2x LilyPad LED — Green
- 2x LilyPad LED — Blue
- 5x Expansion Ports
Kit Also Includes:
- 2x Conductive Thread Bobbin
- 1x Needle Set
- 1 x 110mAh LiPo Battery
- 1x USB micro-B Cable — 6 Foot
Documents:
More Info
Weight | 0.0733 kg |
---|---|
Dimensions | 13 × 10 × 3 cm |
Ecosystem |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Magnet
SKU: Mag1These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!$2.75 USDOut of stock
Read more -
GM11a/12a/13a/14a Mounting Screw/Bolt
SKU: M1.7x035This metric bolt matches the threads on the face of the GM11a, GM12a, GM13a, and GM14a gear motors, making mechanical installations easier. Sold individually.$0.20 USDIn stock
Add to cart -
PICAXE-40X1
SKU: 28490The PICAXE-40X1 IC is the biggest, baddest PICAXE made. LOTS of power, memory, and ability, all programmable in a graphical flowchart-like language or easy-to-learn BASIC.This product has been discontinued.Out of stock
Read more -
Push Pogo Pin – Cone Tip
SKU: PP12-100This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
PICAXE-28X1 SMD
SKU: 28482$8.95 USDThe PICAXE-28X1 is powerful, but how about being powerful AND tiny? Here's the surface-mount version!
In stock
Add to cart
Reviews
There are no reviews yet.