LilyPad Battery Connect

50483

This Product Has Been Discontinued, This Page Is For Reference Only.

2.95 USD
Qty
Price
1
$2.95 ea.
2+
$2.66 ea.
100+
$2.36 ea.

The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.


Description [Hide]

Sometimes, you just gotta JST it. That is, find something that matches them tiny, funky connectors. Well, here's your answer!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: The LilyPad Coin Cell Battery Holder is a design conceived by Felicia Williams of Boulder, Colorado. Also, a portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Documents:

  • Schematic
  • Eagle Files

You Might Also Like [Hide]

360 Yard Spool of Conductive Thread

50472

It ain't wire - it's stainless steel THREAD, ideal for low power and signals routing.

$41.95 USD


LilyPad Coin Cell Battery Holder

50485

If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.

$4.95 USD


LilyPad LED Micro - Green (5pcs)

50407

Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board.

$3.95 USD


ProtoSnap - LilyPad E-Sewing Kit

50490

The ProtoSnap series is a new way to prototype your projects without a breadboard. This box of goodies comes with a bobbin of conductive thread, needles, a battery and a sewable slide switch, battery holder, push button, and LEDs to jump start you into E-textile circuits!

$24.95 USD


Superflex 3m 90 LED Strand with 3xAA Battery Box

60660

Here's a simple battery-powered, portable and flexible LED string solution. 3 meter, ~3cm spacing, powered by 3AA cells. Ideal for quick "BLING" effect!

$10.95 USD


Adafruit 8-channel Bi-directional Level Converter - TXB0108

18977

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

$8.00 USD


0.82mm 12-Tooth Pinion

51609

12 tooth pinion, 0.82mm bore for 6mm pagers. Measures 3.46 x 3.96 x 3.96mm.

$1.35 USD


20k Multi-turn Trimpot

RT20k

This 20k 20-turn trimming potentiometer has the adjustment screw is on the narrow side, opposite the three inline leads.

$2.50 USD


Voltage Divider

33420

The Voltage Divider eliminates the need to connect a resistor to an analog input by putting a high precision potentiometer on the board to allow the adjustment of the 'fixed' resistor.

$7.25 USD


ProtoBoard2H-1, 2-hole Strips, 1 sided, 50x80mm

20922

Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.

$3.11 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!