Conductive Thread - 50'
50471
10.95
USD
Qty
Price
1
$10.95 ea.
2+
$9.86 ea.
100+
$8.76 ea.
Conductive thread is a creative way to connect various electronics onto clothing.
Description [Hide]
This thread can carry current for power and signals. While not as conductive as traces on a printed circuit board (PCB), this thread makes wearable clothing 'wearable'!
This thread is stainless steel making it extremely tarnish resistant. This thread is a 4-ply thread making it thicker with the ability to conduct more power. Because of its thickness this thread is often laid on a fabric and then held in place with a over-stitch of non-conductive machine sewable thread.
This thread has a very low resistance of about 4 Ohms per linear foot and weighs about 0.35 ounces for the full 50 feet.
Documentation [Hide]
- [Data Sheet]: Datasheet 1 (VN 12/2X275/175S/316L)
- [Data Sheet]: Datasheet 2 (VN 12/2X275/175S/316L)
You Might Also Like [Hide]
50450
Arduino USB Board (Uno R3)
The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!
$29.45 USD
Mag1
Magnet
These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!
$2.75 USD
50490
ProtoSnap - LilyPad E-Sewing Kit
The ProtoSnap series is a new way to prototype your projects without a breadboard. This box of goodies comes with a bobbin of conductive thread, needles, a battery and a sewable slide switch, battery holder, push button, and LEDs to jump start you into E-textile circuits!
$24.95 USD
50460
LilyPad Arduino 328 Main Board
This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!
$21.95 USD
50468
LilyPad Button Board
Part of the LilyPad wearable electronics system, this board gives the user a discrete, non-sharp button interface
$1.50 USD
59050
Fosshape 300 Heat-formable fabric
Fosshape is a felt-like polyester fabric that is formable and pliable until it is exposed to heat that collapses it's structure and locks it into place.
$25.00 USD
19062
Adafruit Trinket-Powered Neopixel Goggle Kit
This kit is a bit goofy and geeky, but a whole lot of fun to wear - Glowy goggles!
$40.00 USD
60660
Superflex 3m 90 LED Strand with 3xAA Battery Box
Here's a simple battery-powered, portable and flexible LED string solution. 3 meter, ~3cm spacing, powered by 3AA cells. Ideal for quick "BLING" effect!
$10.95 USD
51084
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
A right angle bracket used to mount a NEMA 17 stepper motor.
$2.95 USD
52600
OpenBeam Extrusion 1000mm Length
This is the 'beam' part of 'Open Beam'. This is the central building component for the system, and is available in both black and silver.
$10.00 USD