Buffered ±2g Accelerometer

50300

This Product Has Been Discontinued, This Page Is For Reference Only.

26.75 USD
Qty
Price
1
$26.75 ea.

The DE-ACCM2G is an off the shelf 2 axis 2g accelerometer solution with analog outputs and integrated op amp buffers.


Description [Hide]

The DE-ACCM2G is an off the shelf 2 axis 2g accelerometer solution with analog outputs. It features integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads.

To maximise usability, it is designed to fit in the DIP-14 form factor, making the DE-ACCM2G suitable for breadboarding, perfboarding, and insertion into standard chip sockets. To keep things as simple as possible, there are only 4 pins - two for power, and two for the X and Y analog outputs.

Additional circuitry ensures that the product won't be damaged by reversed power connections, or voltages above the recommended ratings.

Documentation [Hide]

You Might Also Like [Hide]

31040

NunChucky Wii Nunchuck I2C Breakout Adapter

Use the NunChucky I2C Breakout Board Adapter to use your Wii Nunchuck controller in your own projects!

$3.00 USD

50660

IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL3

Need a tight and tidy way to measure 6-degrees of freedom? The SparkFun IMU Digital Combo Board, measures pitch, roll, yaw, and rate of acceleration on each axis in a very flat package!

$39.95 USD

50656

SparkFun Triple Axis Accelerometer - ADXL345

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16G.

$19.00 USD

50658

Triple Axis Accelerometer Breakout - ADXL335

The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA!

$15.00 USD

SLED-RG-CC

Red / Yellow-green Common cathode LED

When you need two colours in one place, where do you look? Right here, and get a face full of red, then a yellow-green in a standard 5mm LED package.

$0.40 USD

32010

Motor Mind BE 3A Serial Motor Controller

Here is a motor controller that only needs 2 lines for control, it communicates serially via 2400 or 9600 Baud TTL signals. It's a smart controller that has a number of parameters that can be adjusted and can return valuable data such as speed & position.

$29.99 USD

17008

2 x CR2032 - Coin Cell Battery Holder

2x CR2032 battery holder with 12" of wire.

$1.95 USD

28494

PICAXE-40X2 IC - Low Voltage

This IC is just like the PICAXE-40X2, but operates on a lower voltage range.

$11.99 USD

R2.0K

2.0k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

50495

ProtoSnap - LilyPad Development Board

LilyPad Development Board - Wearables design system

$59.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!