You'll save tons of time and won't need the soldering iron for these Sharp infrared sensor cables! These cables allow you to easily interface Sharp infrared sensors to your robotics project without the need for soldering.

Description ^[Hide]

This 20 cm 3-pin cable mates with the connector on the Sharp IR Sensor and allows convenient connection to standard 0.1" 3-pin (servo-style) headers.

Features:
• The end terminates with a power and data connection
• It is pre-wired with the JST connector on one end, and the standard 0.1" spaced connector on the other
• The cable is three circuits, black, red, and yellow
• Easy to use with our Sharp Analog Distance Sensor 10-80cm and Sharp Analog Distance Sensor 20-150cm

You Might Also Like ^[Hide]

35238

Sharp Analog Distance Sensor 10-80cm

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4" to 32" and an analog voltage indicating the distance, this sensor is very easy to use.

$9.95 USD

35235

Sharp Analog Distance Sensor 20-150cm

The Sharp line of analog infrared rangefinders are back, and with their usual high-level of noise and color immunity. These are great distance sensors that should be near the top of anybody's list for simple & effective obstacle detection!

$13.95 USD

39290

Solarbotics CMDR (Compact Motor Driver Robot) Shield

Give your project a muscular interface with the Compact Motor Driver Robot (CMDR) Shield! Bi-directionally drive TWO gear motors or a single stepper motor, read 6 analog sensors, and control up to 8 servos all at the same time.

$28.95 USD

Servo

Servo S03N

The GWS S03N servo is a good, solid workhorse if you have a need for inexpensive reliable servos.

$11.95 USD

K SV-PIC

Solarbotics Sumovore PIC Brainboard V2.0

Using one of the most popular styles of microcontrollers, this brainboard add-on replaces the standard discrete-logic brain with an established, powerful microcontroller! For use on select products.

$25.95 USD

K SV-Atmel

Solarbotics Sumovore Atmel Brainboard V2.0

This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)

$20.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

25160

BASIC Stamp Discovery Kit (USB)

The BASIC Stamp Discovery Kit (USB) is a great way to learn the Basic Stamp.

$160.00 USD

22305

28BYJ-48-16 16:1 Stepper Gearmotor

Originally designed for control of HVAC vanes and similar low-demand equipment, these stepper-motor gearboxes have lots of hacking potential. This is the lower torque / higher speed 16:1.

$4.50 USD

Sharp Sensor Cable, 20cm