30cm 5-Conductor long 0.1" Molex Cable


This Product Has Been Discontinued, This Page Is For Reference Only.

3.00 USD
$3.00 ea.

Pre-assembled 5-way, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!

Description [Hide]

With all these neat sensors and the like, you must get tired of clipping off the cables from your mouse to wire them up. And all that keyboard-navigation just ain't that simple, is it?

Here's your solution - a pre-assembled 30cm (12") cable, with 5 conductors leading to a 0.1" pitch molex connector, and with convenient pre-stripped ends on the other side!

You Might Also Like [Hide]


150mm Futaba-style Servo Extension Cable

Extends the reach of your servo-cable interface another 150mm.

$2.00 USD


Sharp Sensor Cable, 20cm

You'll save tons of time and won't need the soldering iron for these Sharp infrared sensor cables! These cables allow you to easily interface Sharp infrared sensors to your robotics project without the need for soldering.

$1.95 USD


7.5" PH 2.0 Battery wire - JST with Black / Red

JST connectors are tight & tidy, but not that easy to plug into, unless if you have some of these!

$0.95 USD


I2C-It Y-Cable Harness

The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness to hook them up!

$2.50 USD


A to B USB Cable, 6 ft

It doesn't get much more standard than this 6-foot USB A to B cable.

$5.95 USD


SparkFun Cerberus USB Cable - 6ft

The Cerberus, it sounds really smart, and it really is! It provides a great solution for the age old problem of never having the right USB cable. This is a 3 in 1 USB cable that has a Mini-B, Micro-B and Standard-B on one side to a single USB-A male connector on the other.

$5.95 USD


SparkFun Hydra Power Cable - 6ft

Behold, the Hydra! It doesn't have seven heads as you might expect, nor is it even a dragon, but it is a great way to get 5V to your project via 3 separate power connections broken out from a USB-A male connector.

$4.95 USD


40 pin Female-to-Female Jumper Cable

This rainbow jumper bundle is quite handy for making a color-coded wiring harnesses. It's also suitable for all kinds of 0.1" spacing applications like breadboarding or connecting between headers on PCBs!

$6.95 USD


Double Socket Dual Base Shield for WeMos D1 Mini NodeMCU

Double up the possibilities of your WeMos D1 Mini projects with this dual base shield.

$3.50 USD


Teensy USB Board, Version 3.5 without Pins

PJRC did it again! Arduino compatible, 32bit, 120MHz ARM Cortex M4, and 5V tolerant to boot!

$24.25 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!