Parallax 25A Motor Controller

32050

This Product Has Been Discontinued, This Page Is For Reference Only.

49.95 USD
Qty
Price
1
$49.95 ea.

The HB-25 Motor Controller in a fast and inexpensive way to control a DC motor up to 25 Amps.


Description [Hide]

The HB-25 motor controller combines the power of a 25 Amp H-bridge with the simplicity of a servo.

The HB-25 is more than just a motor driver chip connected to some logic and high current drivers on a PCB. A quality H-bridge involves an efficient thermal design, which is what the HB-25 has accomplished through a machined heat sink and fan to draw air over the H-bridge; keeping it cool even under full load .

A beautiful piece of engineering and a bargain at the price.

Features:

  • Single pulse required to set motor speed.
  • A single BASIC Stamp port can control two HB 25’s.
  • On-board fuse and full rating terminal lugs.
  • Works with any size motor up to 1/2 HP.
  • Contains both H-Bridge and Controller.
  • Connector allows you to daisy chain two HB-25’s.

Documentation [Hide]

You Might Also Like [Hide]

50550

Logic Level Converter

The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices.

$1.95 USD

32010

Motor Mind BE 3A Serial Motor Controller

Here is a motor controller that only needs 2 lines for control, it communicates serially via 2400 or 9600 Baud TTL signals. It's a smart controller that has a number of parameters that can be adjusted and can return valuable data such as speed & position.

$29.99 USD

50115

Sabertooth Dual 12A Motor Driver

The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.

$69.99 USD

51003

Pololu Jrk 21v3 USB Motor Controller w/ Feedback

The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC).

$49.95 USD

50858

Rover 5 Robot Platform

If you're looking for a base for your next robot, look no further than the Rover 5. This 4 motor monstrosity takes any terrain by storm.... just don't take it out in a storm... please!

$59.95 USD

50512

FTDI Basic Breakout (5V)

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards.

$14.95 USD

50510

FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD

GMW

GM2/3/8/9/17 Gear Motor mounts

Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)

$1.25 USD

50560

20 Channel EM-506 SiRF III Receiver with Antenna

This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna!

$39.95 USD

28960-A

ATmega328P-20PU w/ Arduino Firmware

This particular ATmega328P-20PU comes programmed and tested with the Arduino Firmware.

$4.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!