Easy Bluetooth Module


This Product Has Been Discontinued, This Page Is For Reference Only.

69.95 USD
$69.95 ea.

The Easy Bluetooth Serial Module is an effective and low-cost solution to free your hardware applications from wires.

Description [Hide]

The Easy Bluetooth Serial Module is an effective and low-cost solution to free your hardware applications from wires. The module is small in size, and with it's SIP header design, it can fit on any 0.1" spacing breadboards for rapid prototyping. The module can be powered with various voltages since it has an on-board regulator; allowing it to be used with all the Parallax, Inc microcontrollers. The RBT-001 module is removable, so various other applications can be designed without the SIP header attached if desired.


  • 1.x & 2.0 Bluetooth Compliant
  • Easy Serial Communication
  • Class 2 Operation (nominal range up to 30m)
  • Low Power Consumption
  • On-board regulator for safe operations across various voltages

Key Specifications:

  • Power requirements: 3.3 to 5.5 VDC
  • Communication: UART Command/Data Port supports for up to 921.6k baud rate
  • Dimensions: 1.40 x 1.79 x .49 in (34.41 x 45.65 x 12.51 mm)
  • Operating temp range: +32 to +113 °F (0 to +45 °C)

Note: RBT-001 without SIP header is not a supported platform from Parallax, Inc Technical Support.

Documentation [Hide]

You Might Also Like [Hide]


ESP8266 ESP-32

The much-anticipated ESP32 is here: Bluetooth, Wifi, Dual Core, IoT just became doable!

$7.95 USD


3W Stereo Bluetooth Interface, 3.7~5VDC, FM / TF/ USB, IR

Here's a fully featured stereo Bluetooth v4.2 module. Output USB, SD card, or Bluetooth audio over its 3W amplifiers.

$14.50 USD


Roving Networks RN42-XV Class 1 Bluetooth - XBee Compatible

Easily add Class 1 Bluetooth to any of your Xbee enabled projects! This module allows your project to be up to 20 meters away.

$24.95 USD


Grove - BLE (dual model)

Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions.

$22.50 USD


LCD2041 Serial LCD Module

This 20 character x 4 line serial LCD module is identical to the LK204-25 model except that it does not have a keypad interface and only has 1 GPO.

$64.95 USD


Seeed Grove - Digital Light Sensor

This module is based on the I2C light-to-digital converter TSL2561.

$9.90 USD


ProtoBoard-3U, 6-hole Strips, 1 sided, 100x160mm

This traditional soldering protoboard is very similar to a solderless breadboard, but also accommodates a 96-pin VME backplane connector for slotting connectivity.

$10.78 USD


Cat's Ears Fosshape Kit

Simple cat ears constructed from Fosshape - a heat-formable costuming fabric.

$15.00 USD


Spare Part - Long Socket Pin

Long Augut Socket pins for sensors, rocker points, or anything else you can think of!

$0.30 USD


PCA9306 Level Translator Breakout

Sometimes, voltages collide. When you have parts that expect/speak at different voltage levels, you have to build a mediator to smooth things out. This SparkFun BOB-10403 uses PCA9306 two-channel bidirectional voltage-level translator on a nice, small breakout board.

$6.95 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!