Adafruit Trinket - Mini Microcontroller - 3.3V Logic




$7.95 ea.

Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered.

Description [Hide]

The Trinket has to be one of the smallest USB enabled Arduino compatible microcontrollers we've seen yet! This pretty little thing is great for when you want to keep you electronics project hidden, low-cost, and simple.

Please note: that there is only 5.25K of usable programming space (6 times smaller than the Arduino UNO) which means that this board should only be used to program simple projects. Adafruit has done an amazing job by providing a bootloader that allows USB programming but because of this, the available programming room is decreased by 2.75K. Sometimes size really does matter!   


  • Atmel ATtiny85 8-bit 8MHz Processor
  • 8K (only 5.25K usable) Flash Memory
  • 512 bytes RAM Memory
  • 512 bytes EEPROM Memory
  • 5 I/O pins - 3 analog and 3 PWM shared between the pins
  • 1 I2C
  • 1 SPI
  • Available in both 3.3V and 5V
  • On board power and indicator LEDs
  • Reset button for entering bootloader or restarting the program
  • Dimensions: 1.2" x 0.6" x 0.2" / 31mm x 15.5 x 5mm
  • Weight (no headers): 1.85 grams

Related Products [Hide]


Adafruit Trinket - Mini Microcontroller - 5V Logic

Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered.

$7.95 USD


JST-PH-2.0 2-Pin Connector Plug w/ Wire

A dramatic tale of two wires. One red. One black. Joined by a single female JST connector. Of destiny.

$1.29 USD


17 x 10 Mini Breadboard

Look! It's a 17x10 Mini Breadboard! Works great for prototyping, and not-so-great for cutting bread.

$3.95 USD


Adafruit 8-channel Bi-directional Level Converter - TXB0108

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

$8.00 USD


Arduino Due

The long awaited ARM board by Arduino is finally here, now you can access higher level functionality while still using the wildly popular Arduino IDE.

$49.95 USD


Adafruit Pro Trinket LiIon/LiPoly Backpack Add-on

Charge and power your Pro Trinket with this LiIon/LiPoly Backpack Add-on board by Adafruit.

$4.95 USD


Parts Bundle - Symet FLED

These aren't kits, as much as they are an inexpensive bag of components so you can build yourself a Symet along the lines of the PMK Trimet.

$13.50 USD


Adafruit PowerBoost 500c - rechargeable

Get your 5V out of a single 3.7V LiPoly / LiIon cells at a MINIMUM of 500mA. Recharge while drawing power on-the-fly.

$14.95 USD


4-pin JST SM Plug & Cable Assembly

These 4-pin JST SM pigtail connectors mate perfectly with the RGB LED strips. They also make a good general purpose connector for any project. Each pack comes with one male and one female connector. The wire leads are 6 inches long and are term

$1.50 USD


Hakko Replacement Tip 0.8

The Hakko Replacement Tip 0.8 is a 0.8mm high quality replacement Chisel tip for your Hakko 936 or 888 station.

$8.95 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!