Adafruit Monochrome 128x32 I2C OLED graphic display SKU: 18996

Adafruit Monochrome 128×32 I2C OLED graphic display

$17.50 USD

These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1″ diagonal, made of 128×32 individual white OLED pixels, each one is turned on or off by the controller chip.

In stock

$17.50 USD
Categories: , , Tag:

Description

Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! 
 
The driver chip SSD1306, communicates via I2C only. 3 pins are required to communicate with the chip in the OLED display, two of which are I2C data/clock pins.

The OLED and driver require a 3.3V power supply and 3.3V logic levels for communication. To make it easier to use, a 3.3v regulator and level shifter are added on board! This makes it compatible with any 5V microcontroller, such as the Arduino.

The power requirements depend a little on how much of the display is lit, but on average the display uses about 20mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that turns 3.3v-5v into a high voltage drive for the OLEDs, making it one of the easiest ways to get an OLED into your project!

 
Features:
  • I2C Interface (7-bit address 0x3C)
  • 3.3V operation, 5V compatible
  • Built-in OLED charge pump
  • ~15mA current draw (varies on graphic intensity)
 
Dimensions:
  • Board – 35 x 20mm (1.4 x 0.8″)
  • Display – 25 x 11mm (0.98 x 0.43″)
  • Thickness – 4mm (0.16″)

Display Information:

  • 23.1mm (0.91″) Diagonal
  • 128 x 32 Resolution
  • White monochrome display
  • Module size – 46.3 x 11.5 x 1.45mm
  • Panel size – 30 x 11.5 x 1.45mm
  • Acive Area – 22.38 x 5.84mm
  • Pixel Pitch – 0.175 x 0.175mm
  • Pixel Size – 0.159 x 0.159mm
  • Brightness – 150cd/m2 (typ) @ 7.25V

Useful Links:

example code in the form of an Arduino library for text and graphics. You’ll need a microcontroller with more than 512 bytes of RAM since the display must be buffered.

You can download our SSD1306 OLED display Arduino library from github which comes with example code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 512 bytes of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller.

Resources

More Info

Weight 0.006 kg
Dimensions 11 × 4 × 4 cm
Count

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.