USB Isolator Board


This Product Has Been Discontinued, This Page Is For Reference Only.

48.00 USD
$48.00 ea.

Handy device to run your USB equipment electrically separated from your PC. It removes a real potential problem when using USB-based test equipment!

Description [Hide]

This board breaks electrical connection between USB host and peripheral while allowing data to pass. Design is based on Analog Devices ADuM4160 USB Isolator IC. Supports full/low speed USB 2.0 compatible operation and peripheral side power up to 600ma. A useful addition to any PC-based test instrument, USB audio device, as well as any other USB application where elimination of ground loop or power line pickup is desired.

Device requires 6to25VDC 500mA 2.1mm barrel jack power supply.

You Might Also Like [Hide]


DS18B20+ Temperature Sensor

The DS18B20+ is a handy, 1-wire compatible temperature sensor, ideal for interfacing with the PICAXE!

$4.95 USD


SparkFun USB to RS-485 Converter

This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485.

$19.95 USD


FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD


Parallax USB to Serial RS-232 Adapter

The Parallax USB to RS-232 is a great little adapter that takes your mini-USB connector and converts it to a RS-232 interface!

$16.99 USD


Adapter, 6VDC @ 500mA

This is a general purpose unregulated power adapter that converts 120VAC@60 Hz (North American) to 6V DC at 500mA.

$9.95 USD


Engineer's Mini Notebook Compendium

Get this complete four book set and save!

$45.95 USD


Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit.

$19.95 USD


24 x 33mm Monocrystalline Solar Cell + MSE Circuit

This epoxy-encapsulated monocrystalline solar cell generates a nominal 4.5V / 18mA (sunlight) from a 24x33mm package. And has an integrated solarengine circuit board!

$6.50 USD


Making Things Talk

Make publications does it again with another great title "Making Things Talk". Full of projects and ideas to make talking objects from anything. Get your copy from us sooner than later!

$34.99 USD


GM2/GM8 Gear Motor Bracket, Laser-Cut Steel

The GM2/GM8 gear motors have convenient holes for mounting, but these precision stamped-steel brackets add to their versatility!

$1.50 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!