GT2 Idle Pulley Tensioner Wheel Bore 4mm - no teeth
14430
4.50
USD
Qty
Price
1
$4.50 ea.
4mm dia. Idler Pulley Tension Wheel for GT2
Description [Hide]
For building machines (sometimes even ones not 3D printers). This is a GT2-sized idler/tensioner wheel, with internal 4mm bearing.
Specifications:
- Aluminium
- Diameter: 9.6mm inside, 13.0mm outside, 8.6mm wide
- Matches 16 tooth diameter
- 4mm spindle bearing
- For use with GT2 Timing Belt
You Might Also Like [Hide]
14445
GT2 Timing Belt, sold by meter
This belt may not hold your pants up, but it works great with pulleys and pinions! Sold by the meter up to 10M in length! If you want a 5M length, order 5.
$6.00 USD
$8.95 USD
$5.95 USD
22091
Solarbotics Pico Linear Servo Voltage Adapter Kit (5V to 3.6V)
Like some electronics, this linear motion Pico servo doesn't like running at over 5V. Even slightly less is better. This adapter board adds a bit of voltage drop to a 5/6V system to make your servo happy.
$1.00 USD
HexW050
0.050" Bondhus Hex Wrench
This is a quality 0.050" allen-key style hex wrench, ideal for tightening hex socket set screws like the ones used in our RW2 wheels.
$0.50 USD
HS14x14x4
Silver Color Aluminum 14x14x4mm Heat Sink with Adhesive
Use these peel-and-stick heat sinks to remove heat from sensitive ICs.
$1.00 USD
HS14x14x6G
Gold Anodized Aluminum 14x14x6mm Heat Sink with Adhesive
Use these peel-and-stick heat sinks to remove heat from sensitive ICs. Perfect for Raspberry Pi processors!
$1.00 USD
RM2
Regular Motor 2
Need more power out of your gear motor? This is a high-power motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.
$2.25 USD
$0.25 USD
#4-40x0.25hex0.25mf-son
4-40 x 1/4 hex, 1/4 tall male female standoff Nylon
It's a 1/4" tall, male/female nylon standoff, threaded for #4-40
$0.35 USD