The XT90 is a high, HIGH current capable connector for DC battery connections.
The XT90 was designed and non-patented by Hextronik to establish a good, inexpensive battery connector. It's a brute.
Yup... It's a DC power plug jack. Exciting stuff.
The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.
The JST-ZH 3-pin connector is another common electronics interconnect standard.
Extra cables for Grove modules.
This tiny breakout board for TI's DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE.
This IC is just like the PICAXE-40X2, but operates on a lower voltage range.
Please note this is the activation key only, once you purchase it, the key will be sent to you by email.
Male Strip - 5 per Strip, 0.1" spacing
For a good basic set of electronics-building tools for when you're on-the-go, here's what we recommend. Hakko-to-go!
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.
Forgot Your Password?
Don't Have an Account?Sign Up!