Seeed Raspberry Pi Breakout Board v1.0 $14.95 The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your Raspberry Pi with other components and modules. Grove - Light Sensor(P) $3.75 Panel mount light sensor from SeeedStudio. XBee WiFi Module - Wire Antenna $52.75 This is the XBee WiFi […]
Painted GraviTrack
Solar botics
March 5, 2018
We always enjoy seeing our products being modified, revamped and DIY-ed, as well as the results of these transformations.
Our customer Vera Kark provided us with some thoughtful feedback on adding mechanical tweaks to improve our Solar GraviTrack build and documentation. She also painted the brown MDF of the machine. She used tempera paint on the wood components still in panelized form, and the GraviTrack's performance seemed to be unaffected.
The GraviTrack looks great in vibrant jewel tone colours, however, we do not recommend applying paint to the hand mechanism itself. You can paint the base and the rails, avoiding the hand mechanism completely. The moisture and the thickness of the paint might affect the precise tolerances of the moving parts, and will interfere with its proper functioning. Another relatively safe option might be felt tip marker since the moisture from alcohol evaporates quickly.
Photos & video by Vera Kark
P.S. Also, a particularly bad idea is painting your GraviTrack after the assembly is completed. Even though we were using a very watered down acrylic paint, the mechanism seized up the moment the paint became sticky. Don't be like us. Take care of your GraviTrack.
A portrait of a sad stuck GraviTrack
MORE POSTS
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Solarbotics.net!
Solarbotics Ltd. is pleased to announce the re-unveiling of Solarbotics.net. Solarbotics.net is a BEAM Community Server that we, at Solarbotics are proud to sponsor. Our involvement with Solarbotics.net is as a hardware sponsor - we are providing the server hardware and the bandwidth for this project. It is being managed at arm's-length by Eric Seale, […]
Ardweeny!
Here's the Ardweeny - the smallest breadboard-friendly Arduino-compatible kit! Sorry it took almost a month to get this ready. The GVS-Shield took priority, and it is the holiday season. Kinda crazy here. The Ardweeny has proven to be quite handy in the shop where we've got several projects on the go. Plug in a 'weeny […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.