Nuts and Volts author Robert Nansel has reviewed our SW2 kit and has written up an excellent review. You can get a sample magazine from the Nuts and Volts website or search their distributers page for where you can get the magazine. Check out the add on page 53 for our add, as well as […]
Painted GraviTrack
Solar botics
March 5, 2018
We always enjoy seeing our products being modified, revamped and DIY-ed, as well as the results of these transformations.
Our customer Vera Kark provided us with some thoughtful feedback on adding mechanical tweaks to improve our Solar GraviTrack build and documentation. She also painted the brown MDF of the machine. She used tempera paint on the wood components still in panelized form, and the GraviTrack's performance seemed to be unaffected.
The GraviTrack looks great in vibrant jewel tone colours, however, we do not recommend applying paint to the hand mechanism itself. You can paint the base and the rails, avoiding the hand mechanism completely. The moisture and the thickness of the paint might affect the precise tolerances of the moving parts, and will interfere with its proper functioning. Another relatively safe option might be felt tip marker since the moisture from alcohol evaporates quickly.
Photos & video by Vera Kark
P.S. Also, a particularly bad idea is painting your GraviTrack after the assembly is completed. Even though we were using a very watered down acrylic paint, the mechanism seized up the moment the paint became sticky. Don't be like us. Take care of your GraviTrack.
A portrait of a sad stuck GraviTrack
MORE POSTS
Resistance is Futile if < 1ohm
Hey, look at us! We made a witty, over-used joke! But seriously, this week we have a schwack-load of resistors for you. Normally we save most of these for our internal use, but what's so fun about that? So we've gone ahead and opened up our entire inventory of 5% accuracy, 1/4 watt resistors. There […]
Arduino Leonardo Preorder, Cool Link Wed...
Big news! We've put in an order to bring in a schwack-load (a scientific unit of measurement) of the new n' shiny Arduino Leonardo. We can't quite say when they're set to arrive, though, but we're hoping it'll only be a few weeks...ish. Looks like this will be a really popular board, due to the impressive […]
Temperature Sensors, New Instructable
Woo, we've had a busy week! To start things off, we have a new category - Temperature Sensors! So far it has the following items: Humidity/Temperature Sensor DS1620+ Serial Digital Thermometer DS18B20+ Temperature Sensor Devantech TPA81 8x1 Thermopile LilyPad Temperature Sensor Yeah, it's a pretty bare category at the moment, but we'll be adding to […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.