We always enjoy seeing our products being modified, revamped and DIY-ed, as well as the results of these transformations.
Our customer Vera Kark provided us with some thoughtful feedback on adding mechanical tweaks to improve our Solar GraviTrack build and documentation. She also painted the brown MDF of the machine. She used tempera paint on the wood components still in panelized form, and the GraviTrack's performance seemed to be unaffected.
The GraviTrack looks great in vibrant jewel tone colours, however, we do not recommend applying paint to the hand mechanism itself. You can paint the base and the rails, avoiding the hand mechanism completely. The moisture and the thickness of the paint might affect the precise tolerances of the moving parts, and will interfere with its proper functioning. Another relatively safe option might be felt tip marker since the moisture from alcohol evaporates quickly.
Photos & video by Vera Kark
P.S. Also, a particularly bad idea is painting your GraviTrackafter the assembly is completed. Even though we were using a very watered down acrylic paint, the mechanism seized up the moment the paint became sticky. Don't be like us. Take care of your GraviTrack.
Help! It's getting colder outside and the trees are starting to shed all over everything. It's quite a mess. It's pretty, but a mess all the same. So we did what anyone would do in such circumstances - we made a small DIY tank platform wirelessly controllable, released a new breakout board, and put together […]
The America Solar Challenge finishes here in Calgary tomorrow (July 27) betweein 11 and 3:30pm! The teams are coming up over McKnight Blvd., which isn't far from our offices. We'll be out watching them go by for a few hours tomorrow, so if the phones don't get answered for a bit, you'll know why. Go […]
Mega Protoshield for Arduino $20.75 The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping. Single Panel Breadboard with Terminals $13.00 830 contact single panel breadboard with 3 banana terminal jacks. Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is […]
With the runaway success of the Useless Box, many of us here at Solarbotics can be assembling the kits in our sleep, even under a dose of tranquilizers, and be orchestrating the two lasers at the same time with no difficulty whatsoever. Just like I used to count transistors for the latest in Soviet Death […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.