We always enjoy seeing our products being modified, revamped and DIY-ed, as well as the results of these transformations.
Our customer Vera Kark provided us with some thoughtful feedback on adding mechanical tweaks to improve our Solar GraviTrack build and documentation. She also painted the brown MDF of the machine. She used tempera paint on the wood components still in panelized form, and the GraviTrack's performance seemed to be unaffected.
The GraviTrack looks great in vibrant jewel tone colours, however, we do not recommend applying paint to the hand mechanism itself. You can paint the base and the rails, avoiding the hand mechanism completely. The moisture and the thickness of the paint might affect the precise tolerances of the moving parts, and will interfere with its proper functioning. Another relatively safe option might be felt tip marker since the moisture from alcohol evaporates quickly.
Photos & video by Vera Kark
P.S. Also, a particularly bad idea is painting your GraviTrackafter the assembly is completed. Even though we were using a very watered down acrylic paint, the mechanism seized up the moment the paint became sticky. Don't be like us. Take care of your GraviTrack.
It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]
Hey everyone, just a quick heads-up - there's was a bit of a technical hiccup with some account data, so we've had to clean out any stored addresses. We just know how much fun it is to type it in again, but fortunately any address that's used with an order will automatically get saved to […]
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
We've finally come upon a suitable replacment for the venerable, discontinued VPM vibrating pager disk motor. Ah, it was a splendid device, but it sure was easy to break those motor leads... Ah! But the new VPM2 has wires prebonded to the motor, and it's slightly smaller too! We welcome our new vibrating disk motor […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.