Our Tech doesn't stink.

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

Adam Conus sent us a nice little message about his antweight combat robot The Fly.: Western Allied Robotics is kicking off another year of antweight combat events and I need new motors. (Because I'm very, very hard on them!) Still, they're cheap and light. Check out- http://home.comcast.net/~conusa/adam.htm to see the robot complete with solarbotics sticker!

Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor  will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]