Oomlout - Solarbotics Edition!

Dave Hrynkiw
November 2, 2009

Oomlout Project CIRC-02 in actionGood news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit.

Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing our own efforts to the documentation sideof the project. Open-source collaboration works!

So what's different about the Solarbotics edition of the ARDX?

  • 12 colour breadboard template overlay sheets. These make it particularly easy to accurately mount your parts to the breadboard.
  • The 5-cell AA battery pack holder. 7.5V means the 5V power regulator on your Arduino / Freeduino-SB will run perfectly with no fear of a voltage sag.
  • Large 11 x 7" plastic case has plenty of space for your whole experimenter's package - even the manual!
  • Larger-than-normal 10 x 6x3/8" 32 page manual is easier to read than a folded 8.5x5.5" half-sheet manual

The rest of the kit contains a veritable plethoria ("lots of neat things"), including:

  • Arduino Duemilanove with ATmega328
  • 300 point breadboard
  • Laser cut color acrylic base-plate
  • 1 USB A-B cable
  • 70-piece flexible jumper wire bundle (these are nice)
  • 10 x Red 5mm LEDs
  • 11 x Green 5mm LEDs
  • 1 x massive 10mm blue LED
  • 1 x DC Motor
  • 1 x Mini Servo
  • 1 x 74HC595 8-bit shift register IC
  • 1 x Piezo Speaker/sensor element
  • 2 x Pushbuttons
  • 1 x 10k Trimpot with handy finger-sized knob
  • 1 x Photo resistor
  • 1 x TMP36 Temperature sensor
  • 1 x 5V DPDT relay
  • 2 x 2n2222 transistors
  • 25 x 560 ohm resistors
  • 3 x 2.2k resistors
  • 3 x 10k resistors
  • 2 x 1N4001 diodes
  • Arduino-to-acrylic base mounting hardware
  • 4 x 2-pin male headers (for pinning the templates to the breadboard)
  • 1 x 20-pin male headers (for pinning more templates to other breadboards)

MORE POSTS

November 7, 2004
PDXBot Video

We just received an inventory of PDXBot.04 DVDs that we're selling in part to raise funds for the Portland Area Robotics Society (PARTS). It's a pretty hefty video - over 2 hours long, with many features, including a few cameos of "The Dave and Grant Show" (we were there competing last year). It's a good […]

August 19, 2015
Cool Links Wednesday

Green 3D Printer 3D printing "filament" infused with living seeds: this is when "eat your greens" takes on a whole new meaning. (Via Colossal) Longitude and latitudeBeautiful CNC renders of wave patterns captured by drone, by David Bowen. (Via CreativeApplications) Light calligraphy Painting with light never gets old - especially if it is beautiful Arabic […]

June 9, 2006
Looking for something special to do this...

We thought what better to do then build a robot? So we have picked three of our kits that you can build with Dad (or a Son/Daughter). And, not only can you assemble these kits in an afternoon, they will look great showing them off at work on Monday! Never built a robot before? No […]

April 20, 2012
Seeeeeed Stuff

HELLO EVERYONE, AND WELCOME TO THIS WEEK'S EDITION OF STUFF THAT'S NEW. But before we get started, how about some light-hearted entertainment, yes? Chances are you've heard of the Toronto International Film Festival. It has something to do with those fancy moving pictures that seem to be all the rage these days.  You might recognize […]

1 30 31 32 33 34 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart