Oomlout - Solarbotics Edition!

Dave Hrynkiw
November 2, 2009

Oomlout Project CIRC-02 in actionGood news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit.

Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing our own efforts to the documentation sideof the project. Open-source collaboration works!

So what's different about the Solarbotics edition of the ARDX?

  • 12 colour breadboard template overlay sheets. These make it particularly easy to accurately mount your parts to the breadboard.
  • The 5-cell AA battery pack holder. 7.5V means the 5V power regulator on your Arduino / Freeduino-SB will run perfectly with no fear of a voltage sag.
  • Large 11 x 7" plastic case has plenty of space for your whole experimenter's package - even the manual!
  • Larger-than-normal 10 x 6x3/8" 32 page manual is easier to read than a folded 8.5x5.5" half-sheet manual

The rest of the kit contains a veritable plethoria ("lots of neat things"), including:

  • Arduino Duemilanove with ATmega328
  • 300 point breadboard
  • Laser cut color acrylic base-plate
  • 1 USB A-B cable
  • 70-piece flexible jumper wire bundle (these are nice)
  • 10 x Red 5mm LEDs
  • 11 x Green 5mm LEDs
  • 1 x massive 10mm blue LED
  • 1 x DC Motor
  • 1 x Mini Servo
  • 1 x 74HC595 8-bit shift register IC
  • 1 x Piezo Speaker/sensor element
  • 2 x Pushbuttons
  • 1 x 10k Trimpot with handy finger-sized knob
  • 1 x Photo resistor
  • 1 x TMP36 Temperature sensor
  • 1 x 5V DPDT relay
  • 2 x 2n2222 transistors
  • 25 x 560 ohm resistors
  • 3 x 2.2k resistors
  • 3 x 10k resistors
  • 2 x 1N4001 diodes
  • Arduino-to-acrylic base mounting hardware
  • 4 x 2-pin male headers (for pinning the templates to the breadboard)
  • 1 x 20-pin male headers (for pinning more templates to other breadboards)

MORE POSTS

June 11, 2012
Project Monday: All-Seeing Eye

This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]

June 27, 2002
Mmmmm... Sandwich PCB's!

David Cook of the Robot Room asked us if we'd carry the partner PCB's for his book 'Robot Building for Beginners'. As we're an enthusiastic fan of this excellent book, we agreed to carry it for him. (even though we don't sell the book...yet!) Please note: You require a copy of this book to successfully […]

October 12, 2012
New Product: Arduino WiFi Shield and Dis...

The lonely product in the long-time-ago previous product post has filed a complaint to the INPDL (International New Product Defendant League) against having to represent the Friday Product Post by itself for an entire month. We therefore had to comply by bringing in some new stock to switch out. So here's an Arduino WiFi Shield […]

September 23, 2003
The Wowwee RoboSapien

Wonder what Mark Tilden has been up to? Prepare to be knocked on your butt - this BEAM-tech Biped walking robot toy looks like a killer for this year's Christmas season! Check it out at our sponsored community server at http://www.solarbotics.net/gallery/Wowwee-Robosapien

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.