Oomlout - Solarbotics Edition!

Dave Hrynkiw
November 2, 2009

Oomlout Project CIRC-02 in actionGood news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit.

Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing our own efforts to the documentation sideof the project. Open-source collaboration works!

So what's different about the Solarbotics edition of the ARDX?

  • 12 colour breadboard template overlay sheets. These make it particularly easy to accurately mount your parts to the breadboard.
  • The 5-cell AA battery pack holder. 7.5V means the 5V power regulator on your Arduino / Freeduino-SB will run perfectly with no fear of a voltage sag.
  • Large 11 x 7" plastic case has plenty of space for your whole experimenter's package - even the manual!
  • Larger-than-normal 10 x 6x3/8" 32 page manual is easier to read than a folded 8.5x5.5" half-sheet manual

The rest of the kit contains a veritable plethoria ("lots of neat things"), including:

  • Arduino Duemilanove with ATmega328
  • 300 point breadboard
  • Laser cut color acrylic base-plate
  • 1 USB A-B cable
  • 70-piece flexible jumper wire bundle (these are nice)
  • 10 x Red 5mm LEDs
  • 11 x Green 5mm LEDs
  • 1 x massive 10mm blue LED
  • 1 x DC Motor
  • 1 x Mini Servo
  • 1 x 74HC595 8-bit shift register IC
  • 1 x Piezo Speaker/sensor element
  • 2 x Pushbuttons
  • 1 x 10k Trimpot with handy finger-sized knob
  • 1 x Photo resistor
  • 1 x TMP36 Temperature sensor
  • 1 x 5V DPDT relay
  • 2 x 2n2222 transistors
  • 25 x 560 ohm resistors
  • 3 x 2.2k resistors
  • 3 x 10k resistors
  • 2 x 1N4001 diodes
  • Arduino-to-acrylic base mounting hardware
  • 4 x 2-pin male headers (for pinning the templates to the breadboard)
  • 1 x 20-pin male headers (for pinning more templates to other breadboards)

MORE POSTS

August 1, 2001
Push Pin Videos

We've had some requests on exactly what do the pushpins do. So, we added videos for two of them. Push Pin 1 (Masher Point) Push Pin 3 (Chisel Point)

May 18, 2002
Site Difficulties - sorry!

If you were trying to visit us here Friday/Saturday, you would notice that we were "404" (site down). Sorry about that. Our host ISP is going through some changes that are ...aren't... going as well as they'd like. Sorry about the problems. Shouldn't be nothing that we can't get fixed, as soon as I find […]

November 19, 2019
Hello...? Is this thing on....?

This is was just a Test. This is a test of the Dave broadcasting system. If this was a real Dave, you'd be notified what to do in the eventuality that you met a real Dave. This has been a test of the Dave broadcasting system. *Beeeeeep*     Ok, it seems like we've got […]

April 3, 2002
WCRG Coming quickly!

The Western Canadian Robot Games is quickly approaching! May 10 & 11; SAIT Heart Building. Solarbotics will be there again, sponsoring (among other things) our own SolarSpeeder race. Aim your solarspeeder through a 4" gap in a wall 8 feet away, and win a ScoutWalker II kit! No registration required - just come on down […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.