Oomlout - Solarbotics Edition!

Dave Hrynkiw
November 2, 2009

Oomlout Project CIRC-02 in actionGood news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit.

Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing our own efforts to the documentation sideof the project. Open-source collaboration works!

So what's different about the Solarbotics edition of the ARDX?

  • 12 colour breadboard template overlay sheets. These make it particularly easy to accurately mount your parts to the breadboard.
  • The 5-cell AA battery pack holder. 7.5V means the 5V power regulator on your Arduino / Freeduino-SB will run perfectly with no fear of a voltage sag.
  • Large 11 x 7" plastic case has plenty of space for your whole experimenter's package - even the manual!
  • Larger-than-normal 10 x 6x3/8" 32 page manual is easier to read than a folded 8.5x5.5" half-sheet manual

The rest of the kit contains a veritable plethoria ("lots of neat things"), including:

  • Arduino Duemilanove with ATmega328
  • 300 point breadboard
  • Laser cut color acrylic base-plate
  • 1 USB A-B cable
  • 70-piece flexible jumper wire bundle (these are nice)
  • 10 x Red 5mm LEDs
  • 11 x Green 5mm LEDs
  • 1 x massive 10mm blue LED
  • 1 x DC Motor
  • 1 x Mini Servo
  • 1 x 74HC595 8-bit shift register IC
  • 1 x Piezo Speaker/sensor element
  • 2 x Pushbuttons
  • 1 x 10k Trimpot with handy finger-sized knob
  • 1 x Photo resistor
  • 1 x TMP36 Temperature sensor
  • 1 x 5V DPDT relay
  • 2 x 2n2222 transistors
  • 25 x 560 ohm resistors
  • 3 x 2.2k resistors
  • 3 x 10k resistors
  • 2 x 1N4001 diodes
  • Arduino-to-acrylic base mounting hardware
  • 4 x 2-pin male headers (for pinning the templates to the breadboard)
  • 1 x 20-pin male headers (for pinning more templates to other breadboards)

MORE POSTS

August 3, 2012
Closed on Monday August 6th

That's it. We've had enough. The weather is just too darn nice outside. So nice, in fact, that we quit. That's right, when Monday rolls around no one is even going to bother coming into the office. You heard us - we'll be closed on Monday, August the 6th. Go ahead and email and leave […]

January 11, 2017
Heated Car Seat Teardown and Repair

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh […]

July 3, 2013
Wednesday Cool Links: Clocks, Cloudscape...

You know, sometimes it is hard to find a proper tone of voice to write these introductions. So how about I express what I wanted through some interpretive dance? *flails extremities randomly. That would do it, right? Being all multidisciplinary-like, merging art (of flailing) with technology (of flailing), just like our today's links: Twenty two […]

August 19, 2011
Tasty Treats and New Treats, Too

A couple of weeks back we held an open house for Calgary's Protospace group. Many BBQ'd items were consumed, many objects were lazored, and many people seemed to be walking around in a stupor of admiration for all the nifty bits and pieces of equipment we have on hand. We had a good time visiting […]

1 2 3 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart