We've been a big fan of Openbeam for a long time, and when Terence Tam started producing 3D printers using this material, we were hopeful that this would be a great fit for his operation. Nice material, great engineering - what could go wrong? LOTS. Follow his spiral down the Asian rabbit-hole when his selected […]
Odds and ends
Dave Hrynkiw
March 27, 2009
Greetings, ye fine fellow travelers of yon internet. This week you'll find that we have three new and completely unrelated items to show off: 
- 17010 3-AA Battery Holder - This three-cell holder has 9V-style snap connectors, and can create 4.5V with Alkaline batteries.
- 17390 Tact Switch - A push-button style switch that's compact, inexpensive and can mount on most breadboards.
- 14080 USB A to Min-B Cable - Finally, something to connect to your Freeduino with!
Yup, none of these have anything interesting in common. That being said, if you can build a robot with these three items and only these three items, we will be blown away.
And just to follow up on one Mr Demers' desktop energy seed lamp over at Instructables from last week, it's turning out to be quite popular. So far it's been featured at Hacked Gadget, MAKE Online, and Yanko Design. Mind you, it's also been on Elektroda.pl, but you may not find it to be that interesting unless you're fluent in Polish.
MORE POSTS
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
We will be at the Calgary Comic Expo!
The Calgary Comic Expo starts this week! If you have not bought your tickets yet, you can do so by clicking here. Keep updated on our Facebook and Instagram for live streams and media coverage of the event! Our booth is #1113.
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.