Not Your Average Door Bell

Solar botics
November 25, 2011

Wireless doorbells have a tendency to... suck. I speak from personal experience on such matters. When they fail to get my attention while at home, apathy generally wins out and inevitably forces me to head down to the FedEx/UPS depot to pick up my missed package. David Watson, a man of action, took matters into his own hands.

David built a custom door bell that strikes children's resonator bells using a custom designed Arduino clone and our GM10 geared pager motors, inspired by the Solar Xylophone featured in Make Magazine. Utilitizing the home's existing wiring for a doorbell hidden behind the installed wireless solution, David ended up with something far more elegant that we think is just fantastic:

Keep up the good work David!

MORE POSTS

June 2, 2009
Maker Faire, Nunchucky, PumLantern

WOW! What a week! Most of us have returned from Maker Faire, where we had a fantastic time. We met a lot of great people, saw loads of neat projects and displays, and got a chance to take in some beautiful California weather.  We're absolutely exhausted after an insanely long and busy weekend, but we're […]

November 17, 2009
What's on the burner...

We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]

July 20, 2012
New Products: All-Seeing Eye, LCDs

A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out: We briefly toyed with the idea […]

September 18, 2003
New Wheels

Remember those bad-boy wheels you saw on Strongbad? Well, they're now available! But be warned - we don't have the sleeve to fix the 2mm shaft to 1/8" hole diameter gap, so you'll have to improvise something yourself. Otherwise, your robot will have a bit of a lope to its roll!

1 86 87 88 89 90 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart