New Years, New PumLantern Art

Dave Hrynkiw
December 30, 2009

Well, we've taken a few days off to enjoy some turkey and presents, and we've come back to the office to keep chugging away... But it's time for another break! New Year's is within spitting distance, and we'll be closed for New Years Day (that, of course, would be Friday, January 1st). As always, we'll resume processing/shipping orders and replying to any correspondence the following Monday. We hope everyone has had a great year and that 2010 will be even better.

On a different note, we want to roll out some new artwork for the PumLantern. Instead of doing all the work ourselves, though, we want some input from you. What theme do you want to see on your lantern shells? Being the graphic designer dude, there are few things I need to keep in mind when designing new artwork:

  • Detail: As impressive as our laser engraver is, it can only cut so small before destroying very fine segments. Additionally, we want the artwork to be somewhat sturdy, so we can't have a whole bunch of itsy-bitsy elements that might break off.
  • Stencil: We're cutting shapes out of a single piece of material - there isn't any glue or wire to keep pieces in their spot. All elements need to be attached to the wall of the lantern, and you can't have any free-floating islands/shapes-within-shapes.
  • Subject matter: We like to release our PumLantern designs through a creative commons license, and we don't like being sued. All our designs have to be original (or build on other public domain designs), and cannot infringe on any copyrighted materials.

So what would you like to see on your lantern? Cute critters? Aliens? Electronic circuitry equations? Flaming tacos? If you want to share your ideas, feel free to give me a shout: chris [at] solarbotics [dot] com . Over the next few weels we'll be sure to follow up the designs that are being frequently requested. But only if they can meet the above design requirements. Feel free to even draw up some rough concepts and send them over - just remember that the simple designs are generally better. Take a look at the existing PumLantern designs or the shell source files if you need something to reference to.

MORE POSTS

June 13, 2005
More interesting links on the inter-web....

Browsing around, I found another link regarding Mark Tilden & WowWee. From the website "AllNerdReview.com" (if that doesn't describe a roboticist...) comes article about a their visit to the New York Toy Fair (ok, so my web-browsing is a bit old). Enjoy... http://www.allnerdreview.com/TOYFAIR05/TF13.htm

October 21, 2003
Robothon workshop almost full!

We've got 20 spots, and 17 seats are filled. If you're planning on being at the Seattle Robothon and want to get in on an introductory Sumovore Workshop, now's the time to check out the registration page! Read More...

December 6, 2000
New Kit!The Hex Pummer

View our newest kit we have online, the Hex Pummer, a very amusing night display that is charged by the sun. When the lights go out, it triggers the high intensity LEDs to start flashing on and off. They start out very STRONG and then fade away until the next LED "PUMMS" on. These amusing […]

May 8, 2009
Propellor, Maker Faire

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.