New Years, New PumLantern Art

Dave Hrynkiw
December 30, 2009

Well, we've taken a few days off to enjoy some turkey and presents, and we've come back to the office to keep chugging away... But it's time for another break! New Year's is within spitting distance, and we'll be closed for New Years Day (that, of course, would be Friday, January 1st). As always, we'll resume processing/shipping orders and replying to any correspondence the following Monday. We hope everyone has had a great year and that 2010 will be even better.

On a different note, we want to roll out some new artwork for the PumLantern. Instead of doing all the work ourselves, though, we want some input from you. What theme do you want to see on your lantern shells? Being the graphic designer dude, there are few things I need to keep in mind when designing new artwork:

  • Detail: As impressive as our laser engraver is, it can only cut so small before destroying very fine segments. Additionally, we want the artwork to be somewhat sturdy, so we can't have a whole bunch of itsy-bitsy elements that might break off.
  • Stencil: We're cutting shapes out of a single piece of material - there isn't any glue or wire to keep pieces in their spot. All elements need to be attached to the wall of the lantern, and you can't have any free-floating islands/shapes-within-shapes.
  • Subject matter: We like to release our PumLantern designs through a creative commons license, and we don't like being sued. All our designs have to be original (or build on other public domain designs), and cannot infringe on any copyrighted materials.

So what would you like to see on your lantern? Cute critters? Aliens? Electronic circuitry equations? Flaming tacos? If you want to share your ideas, feel free to give me a shout: chris [at] solarbotics [dot] com . Over the next few weels we'll be sure to follow up the designs that are being frequently requested. But only if they can meet the above design requirements. Feel free to even draw up some rough concepts and send them over - just remember that the simple designs are generally better. Take a look at the existing PumLantern designs or the shell source files if you need something to reference to.

MORE POSTS

July 12, 2007
Circuit: Lightstorm

Some of you may have found the LightStorm Pummers that Mark Tilden has made using some neat looking plastics. We've built our own variation of the circuit, which is a dark-activated, quad-bicore pseudo-random chaos generated, dual pummer circuit.

February 28, 2014
Friday New Product and MakeFashion 2014

Other than the new goodies, we have one more thing to announce: Solarbotics, as an official MakeFashion partner, has been supporting local and international designers by consulting, providing materials, tech support and snacks. One of the projects we have been working at is Pumping Fashion Lit (by Dee Fontans and Eric Willis). It is featured […]

July 12, 2007
BEP Application: Turbot

The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.

December 14, 2021
Solarbotics / Active-Tech Holiday Hours ...

Looking forward to a bit of recharge time after the holiday rush! While being in that mindset, here's our holiday schedule for both Solarbotics and the Active-Tech Calgary Storefront: December 24th - 9:30-1:30pm December 25th - Closed (HO HO HO!) December 26th - Closed (Whooboy... leftovers and toys!) December 27th - Closed (Moar leftovers... and […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.