It's pretty amazing to see the adoption rate of 3D printers in the last few years, and the kind of creativity they bring out in people. I've seen quite a few variations, particularly while walking through the 3D printer villages at the MakerFaires I've already attended (either as a vendor or just a visitor), but […]
New: The Ardweeny BackPack!
Dave Hrynkiw
October 20, 2010
We've been playing with the Pick and Place machine, and thought about new projects. This one, besides just being plain handy, offered us a simple project to start adding surface-mount parts to!
The Ardweeny is proving to be a popular way to make a breadboard-friendly Arduino-clone, but after the prototyping is done, you still have to figure out how to get your Ardweeny into the real world.
Here's the new Ardweeny BackPack, in both plain and SMD LED version. Plug your Ardweeny into this carrier, featuring:
- Socket mount for easy Ardweeny moving/swapping
- Combination 4-pin header for Servo / Blink-M / I2C interfacing
- Low-dropout 5V regulator
- Temperature sensor (TMP36) mounting pad
- 2-position power jack (end or side-mount)
- #2 screw mounting holes
- SMT LED versions features 8 bottomside LEDs connected to digital pins 0-7 for easy POV (persistance of vision) or bargraph indication
One of our first tests was using an Ardweeny for a dual-scale thermometer, ranging -50 to +50ºC on an analog (servo) scale, and 18 to 32ºC on the bargraph, on a laser cut base. It's a work-in-progress, but the cutting files & Arduino source code are available on the resource page.
Oh, here's a picture of the POV in action!
MORE POSTS
Interesting video...
We're big fans of "Scientific American Frontiers" around here. We were quite surprised to trip over this link of a program called "Games Machines Play". Well worth a view, if you can spare better part of an hour!
RW2i - Internal mount, and new shaft hol...
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw […]
Protected: 3D Printer Training - Crealit...
There is no excerpt because this is a protected post.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.