So here's a late but tenacious Friday post with only 3 but mighty (brand new shiny) products. Not just some… random unrelated strange small bits… But much better! They are all kits. So they have more than one thing in them. Which is better than one thing... How about I stop mumbling the obvious and […]
New: The Ardweeny BackPack!
Dave Hrynkiw
October 20, 2010
We've been playing with the Pick and Place machine, and thought about new projects. This one, besides just being plain handy, offered us a simple project to start adding surface-mount parts to!
The Ardweeny is proving to be a popular way to make a breadboard-friendly Arduino-clone, but after the prototyping is done, you still have to figure out how to get your Ardweeny into the real world.
Here's the new Ardweeny BackPack, in both plain and SMD LED version. Plug your Ardweeny into this carrier, featuring:
- Socket mount for easy Ardweeny moving/swapping
- Combination 4-pin header for Servo / Blink-M / I2C interfacing
- Low-dropout 5V regulator
- Temperature sensor (TMP36) mounting pad
- 2-position power jack (end or side-mount)
- #2 screw mounting holes
- SMT LED versions features 8 bottomside LEDs connected to digital pins 0-7 for easy POV (persistance of vision) or bargraph indication
One of our first tests was using an Ardweeny for a dual-scale thermometer, ranging -50 to +50ºC on an analog (servo) scale, and 18 to 32ºC on the bargraph, on a laser cut base. It's a work-in-progress, but the cutting files & Arduino source code are available on the resource page.
Oh, here's a picture of the POV in action!
MORE POSTS
Sandwich PCB Parts Bundle!
We are finally stocking the complete parts bundle (with PCB) to compliment David Cook's Robot Building for Beginners book. Check out our kits section, and take a look at the Sandwich parts bundle which contains everything, including a nice set of documentation, to build your very own Sandwich bot.
Mark Tilden on CBC Radio
Word is Mark W. Tilden gave CBC Radio a nice interview that'll be aired right after the 10am news on your local CBC station. Not Canadian? Use the internet to your advantage. Use this link to find the station closest to your time zone (or earlier or later if you wish), and tune in!
Circuit: L293D Mini-Sumo
This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.