In our continuing quest to find the successor to the Sunceram throne, we invite you to welcome the SCC2433a solarcell! It's the little brother to the SCC3733, with similar polycrystalline & epoxy construction. It's quite the power-house in direct sunlight, but be warned - the cell arrangment is skewed in favour of current generation, not […]
New: The Ardweeny BackPack!
Dave Hrynkiw
October 20, 2010
We've been playing with the Pick and Place machine, and thought about new projects. This one, besides just being plain handy, offered us a simple project to start adding surface-mount parts to!
The Ardweeny is proving to be a popular way to make a breadboard-friendly Arduino-clone, but after the prototyping is done, you still have to figure out how to get your Ardweeny into the real world.
Here's the new Ardweeny BackPack, in both plain and SMD LED version. Plug your Ardweeny into this carrier, featuring:
- Socket mount for easy Ardweeny moving/swapping
- Combination 4-pin header for Servo / Blink-M / I2C interfacing
- Low-dropout 5V regulator
- Temperature sensor (TMP36) mounting pad
- 2-position power jack (end or side-mount)
- #2 screw mounting holes
- SMT LED versions features 8 bottomside LEDs connected to digital pins 0-7 for easy POV (persistance of vision) or bargraph indication
One of our first tests was using an Ardweeny for a dual-scale thermometer, ranging -50 to +50ºC on an analog (servo) scale, and 18 to 32ºC on the bargraph, on a laser cut base. It's a work-in-progress, but the cutting files & Arduino source code are available on the resource page.
Oh, here's a picture of the POV in action!
MORE POSTS
Wecome to the Beta Site!
Hi all. I went through the effort to invite y'all into our new digs, but didn't stand here at the door to welcome you in! So sorry... Please excuse the sawdust. I'm still pushing the people that push the brooms around here. No matter - everything will be tidied up in no time. The website […]
Weekend Tidbits
Being April in Calgary, it should come as no surprise to any of you that yesterday we had a lovely blizzard which melted and froze, coating everything in a delicious layer of ice. This, of course, is somehow connected to the fact that Solarbotics El Presidante, Dave, is currently in Las Vegas where it is […]
Protected: 3D Printer Training - Crealit...
There is no excerpt because this is a protected post.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.