We've wrapped up our "Zendulums for Japan" support drive, and we're happy to announce we've sold 84 kits for a total of $2,396.07. A donation of $2400 is being processed to Red Cross Japan. Thanks to all for assisting in our little effort to give some help!
New Stuff!
Dave Hrynkiw
February 5, 2003
We've been busy little elves at Solarbotics. New to our product listing is a fair number of parts and ICs that have been requested of us. Like what? Wellll...:
You always need new chips. Especially when somebody on the BEAM list has made something cool:
- LM324 Op-amp (happy now, Bruce?)
- LM393 Dual comparator
- LM386 Audio op-amp
- LM339 Quad comparator
And you can't have new chips without new chip carriers!:
- DC8Pin - 8 pin dual inline IC carrier (for the LM386, 8212, and LM393)
- DC16Pin - 16 pin dual inline IC carrier (for the L293D and 74AC139)
- DC20Pin - 20 pin dual inline IC carrier (for the 74xx240 and 74xx245)
And what fun is it if you can't put your new ICs and carriers on a robot with a new motor?:
- RM2 - High power drop-in replacement motor for the GM2/GM3 gearmotors
- TPM2 - A new, less expensive alternate to the old TPM tiny pager motor!
- RPM2 - The Namiki 1701 replacement; comparable performance for less money!
Ummm... That's it. For now. We now return you back to your regular programming schedule.
MORE POSTS
Cold, hard, steel... mounts!
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Friday New Product Post and a Few Projec...
It's snowing here. Here's the proof - a ruler measured with another ruler, reading about 7" depth of (what used to be) snow. It's a massive invasion of snowflakes, and they don't seem too friendly. The amount of snowfall we are experiencing now can prevent anyone in their right mind from being outside. And the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.