Woooo, new stuff, finally here! OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack $1.90 T-shaped joining plates for all your OpenBeam creations! OpenBeam L Joining Plate, Anodized Aluminum - 2 Pack $1.90 L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles. 5.5-2.1mm DC Power Jack - Female […]
New Products: All-Seeing Eye, LCDs
Dave Hrynkiw
July 20, 2012
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:
|
All-Seeing Eye Sensor Mount Kit - Standard Range $66.92 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
All-Seeing Eye Sensor Mount Kit - Long Range $77.80 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
Serial Enabled 16x2 LCD - White on Black 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
 |
Serial Enabled 16x2 LCD - Yellow on Blue 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.
...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.
MORE POSTS
Heat sinks, Screwdrivers and the Lessons...
You would think in these days it would be a simple task to source something you want to have made. After all, MAKE, the Internet and the world "getting smaller" would have you think that it'd be an easy task. Sometime it is, and sometimes it's like this! We've been to Hong Kong and China […]
Credit Card Woes
Thanks to some information provided to us by a very determined customer (Thanks Erin!), we've been able to pin down why some of your credit cards were being declined. We've been able to correct and verify that this bug has been resolved, so those of you who have been declined while using an otherwise valid […]
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.