We've Got A Shiny New Website Launching This Weekend! This new site corrects a slew of issues with the current website while adding or improving a number of features we think should please everyone. Because of the downtime needed to transfer & verify data from the old site to the new, Our Website Will Be […]
New Products: All-Seeing Eye, LCDs
Dave Hrynkiw
July 20, 2012
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:
|
All-Seeing Eye Sensor Mount Kit - Standard Range $66.92 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
All-Seeing Eye Sensor Mount Kit - Long Range $77.80 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
Serial Enabled 16x2 LCD - White on Black 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
 |
Serial Enabled 16x2 LCD - Yellow on Blue 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.
...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.
MORE POSTS
Organizing the Advanced Section
Every once in a while we like to re-arrange the furniture. Sure, it's nice to have things look new and different, but most of the time we're just trying to make things just work better. This week we've done a little bit of restructuring of our Advanced category - we hope it'll make it easier […]
"Steady as she goes, steersman..."
Solarbotics / HVWTech will be on "maintenance mode" while the bulk of the staff go down to the MAKE Faire in San Mateo, California. The remaining staff have begged for some relief to make the week go easier, so we are not going to be doing any UPS shipments until Monday, May 21. And don't […]
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.