New Products: All-Seeing Eye, LCDs

Dave Hrynkiw
July 20, 2012

A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:

We briefly toyed with the idea of releasing a simplified version of it, called the "Sees-a-Lot-of-Stuff-but-Not-Quite-Everything-Eye", but it just didn't roll off the tongue the same way. Oh well. You can check out the All-Seeing Eye below, along with a couple more new items for the week.

All-Seeing Eye Sensor Mount Kit - Standard Range All-Seeing Eye Sensor Mount Kit - Standard Range
$66.92
The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port.
All-Seeing Eye Sensor Mount Kit - Long Range All-Seeing Eye Sensor Mount Kit - Long Range
$77.80
The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port.
Serial Enabled 16x2 LCD - White on Black 5V Serial Enabled 16x2 LCD - White on Black 5V
$24.95
This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more!
Serial Enabled 16x2 LCD - Yellow on Blue 5V Serial Enabled 16x2 LCD - Yellow on Blue 5V
$24.95
This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more!

Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.

...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.

MORE POSTS

October 23, 2023
Protected: 3D Printer Training - 3D Prin...

There is no excerpt because this is a protected post.

November 9, 2000
New Kit: Type-1 Solarengine Re-issue

It's been a while since we've had this kit online, but due to some diligence we've found materials to update and re-issue it! Using the licensed "MillerEngine" (which we find to be a substantial improvement over the old Solarengine), we've changed the kit with a new black circuit board and updated documentation. Check it out […]

July 13, 2018
BareConductive Tutorials

Our friends at Bare Conductive, whose awesome lineup of products we carry, shared a few more interesting how-to tutorials (previously).

December 7, 2015
Monday New Product: Grove, Raspberry Rel...

Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack) $4.95 4 Pin jumper wire for easy Grove-to-Arduino connections. Infrared LED Emitter $0.50 Standard sized T1-3/4 infrared emitting LED. Raspberry Pi Relay Board v1.0 $29.40 The Relay Shield contains four high quality relays and provides NO/NC connections to control […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.