Last summer during a Solarbotics Robotics for Educators session, one of the teachers noted something about many of the mainstream robotics and electronics learning platforms commonly used in classrooms. He said that those platforms suffered from the Black Box Effect. This effect was where the “black boxes,” the controllers, were plugged into the computer and […]
New Products: All-Seeing Eye, LCDs
Dave Hrynkiw
July 20, 2012
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:
|
All-Seeing Eye Sensor Mount Kit - Standard Range $66.92 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
All-Seeing Eye Sensor Mount Kit - Long Range $77.80 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
Serial Enabled 16x2 LCD - White on Black 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
 |
Serial Enabled 16x2 LCD - Yellow on Blue 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.
...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.
MORE POSTS
Calgary Mini Maker Faire
... is over and it has been great. The weather cooperated, TelusSpark Science Centre grounds cooperated, squirrels cooperated, people checking out our booth were awesome, every single one of them. Check out some photos of the event on our Flickr stream. And our Marble Machine got featured in this great video by Paul Spenard: Not […]
StrongBad victorious again!
Our trip to RoboMaxx was great fun, and StrongBad did it again, winning first place in the Advanced Mini-Sumo competition! The GM6 gear motors did their job, rarely failing to give StrongBad the ability to power opponents out of the ring. We also entered our Sumovore Sumo robot kit (officially available in a day or […]
2002 LANL Workshop in the works...
Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.