We're adding more and more from our Active Tech Calgary store lineup to our website. This week, NTE's line of head-shrink tubing, and Hammond Enclosures. This reflects what we have presently on hand in the store, which we're now able to bring to you via the website! We realize that with the new dataload our […]
New Products: All-Seeing Eye, LCDs
Dave Hrynkiw
July 20, 2012
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:
|
All-Seeing Eye Sensor Mount Kit - Standard Range $66.92 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
All-Seeing Eye Sensor Mount Kit - Long Range $77.80 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
Serial Enabled 16x2 LCD - White on Black 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
 |
Serial Enabled 16x2 LCD - Yellow on Blue 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.
...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.
MORE POSTS
Book Project Parts Bundles
We've had many requests to sell the parts needed to build the robots described in the books that we carry. You are now able to purchase the individual components needed to build your bot, but you're not required to take them all(Sorry, no instructions -- that's what the book is for!). If you've got resistors […]
New Sure Electronics Items, EZ-B Wall-E ...
Howdy folks. I have some bad news. It has just become painfully apparent that the summer is a mere two weeks from its conclusion. Where did it all go? Can't we have a little bit longer? Please? Hrmph, I guess not. That means we need to make the best of the next dozen-or-so days by […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.