The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.
New Product!
Dave Hrynkiw
November 12, 2002
We've been shopping again, but the accountant won't let us hoard all the goodies for ourselves. SOOO, we're announcing the following goodies!
- RBFB: The Book "Robot Building for Beginners" by David Cook, which is an excellent reference for a newcomer to robotics. It's an ideal companion for our own book "Junkbots, Bugbots, and Bots on Wheels".
- SWT8: A new tiny micro SPST switch that is simply too tiny and cool not to take a look at!
- SWT9:A new small lever action SPDT switch with solderable lever. We're doing many experiments using these as robot tactile sensors.
- CdS: There's been renewed interest in photo-resistors (or photocells, or Cadmium-Sulphide cells), and we've finally found a source of good quality units. Unlike many surplus CdS sensors we've tested in the past, these are in reasonably good tolerance.
- 0.01µF Capacitors: It's easier to do high-frequency Bicore experiments with a small capacitor!
Well, back to work - must find more things to hide from the accountant!
MORE POSTS
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
The Solarbotics DIY Island & Repair...
What's the biggest event for Solarbotics in the spring? Calgary Comic Expo on April 27-30! This year we are going to be there as part of the DIY Island (booth 110) at BMO Centre, Calgary Stampede Park. DIY Island is a booth space shared between Solarbotics, Repair Oasis, Protospace and MakerFaire Calgary. Solarbotics will be […]
New Solar Cell!
As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.