New Product: The Solarbotics Paris Flyer...

Solar botics
June 19, 2018

The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles. 

Features

Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion. 

The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.

As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.

As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.

Specifications

  • Intermediate skill level - ages 12+
  • Basic soldering and tools required
  • Solar powered - no batteries needed
  • 1-2 hours build time

Kit includes

• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:

  • 1 x KMSE PCB
  • 1 x 0.2F capacitor
  • 1 x 22uF capacitor
  • 1 x Diode
  • 1 x MCP112-195 voltage trigger
  • 1 x TR2222 NPN transistor

MORE POSTS

September 23, 2003
Solarbotics goes to San Francisco!

Solarbotics recently sent a representative to the Robot Society of America's Robot Expo in San Francisco. Wanna see some pics? Check them out here at http://www.solarbotics.net/gallery/SanFranciscoRSA.

April 28, 2014
Solarbotics at Calgary Entertainment Exp...

Well, we survived the battlefield of 2014 Calgary Entertainment Expo with no human, animal or machinery losses (although with an apparent vocabulary shift towards geekery). In any case, running a double booth was a lot of fun and a lot of work, which makes it satisfying and tiring at the same time. And educating: we've […]

April 6, 2016
Wednesday Links: Transparent Aluminum, G...

Transparent Aluminum Well, technically not exactly aluminum, but aluminum-based ceramic called aluminum oxynitride. Still with quite magical properties. (Via Makezine) Concealed Layers of Product Life Renee Verhoeven's grad project explores the relationship between anatomy and mobility in the series of gloves, using laser cutting. (Via Mocoloco) Asian Snack Enamel Pins These lovely pins by giantrobot.com […]

February 18, 2003
2003 LANL Workshop

We've got the official "OK" to open up registration for the 2003 LANL BEAM Workshop in Los Alamos, New Mexico. The 3-day workshop is from May 1-3, with the 1-day following on May 4. Check it out at any of the following links: Direct IP link (until the following DNS entries echo through the web) […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart