New Product: The Solarbotics Paris Flyer...

Solar botics
June 19, 2018

The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles. 

Features

Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion. 

The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.

As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.

As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.

Specifications

  • Intermediate skill level - ages 12+
  • Basic soldering and tools required
  • Solar powered - no batteries needed
  • 1-2 hours build time

Kit includes

• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:

  • 1 x KMSE PCB
  • 1 x 0.2F capacitor
  • 1 x 22uF capacitor
  • 1 x Diode
  • 1 x MCP112-195 voltage trigger
  • 1 x TR2222 NPN transistor

MORE POSTS

March 19, 2001
Los Alamos BEAM Workshop

We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! […]

December 5, 2009
New stuff!

Well folks, the BEAM Anniversary sale has officially come and gone. So many of you jumped on those awesome deals that we extended them an extra four days before taking them down. Anyways, we have tons of great stuff to get through, so let's plow through starting with the new stock we've brought in over […]

July 12, 2007
Circuit: L293D Mini-Sumo

This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.

March 23, 2016
Wednesday Links: New Materials, Music Ma...

Liquid Metal to Make Stretchable Electronics The elastic tech has huge potential for wearable tech, mobile devices, and even electronic "smart clothing." New Material Inspired by Geometric Patterns Inspired by the intricate geometries and repetitive patterns found in Islamic art, researchers at McGill University developed a material with new properties. (Via ZME Science) Kinematic Petals […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart