New Product: The Solarbotics Paris Flyer...

Solar botics
June 19, 2018

The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles. 

Features

Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion. 

The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.

As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.

As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.

Specifications

  • Intermediate skill level - ages 12+
  • Basic soldering and tools required
  • Solar powered - no batteries needed
  • 1-2 hours build time

Kit includes

• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:

  • 1 x KMSE PCB
  • 1 x 0.2F capacitor
  • 1 x 22uF capacitor
  • 1 x Diode
  • 1 x MCP112-195 voltage trigger
  • 1 x TR2222 NPN transistor

MORE POSTS

July 12, 2007
BEP Application: Turbot

The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.

November 9, 2011
DragonTail Project, New Stuff, Sales

IT IS NOW NOVEMBER. THIS IS NOT A DRILL. STAY CALM. While a change in month is always an unsettling event, this one is particularly dreadful. Why exactly, we're not sure. But we have the feeling that if it was called 'Yesvember', things would be a lot more... Positive. So we're doing what we can […]

November 24, 2017
Solarbotics at Calgary Expo Holiday Mark...

If you are in Calgary & area this weekend, come see us at BMO Centre Expo Holiday Market. On November 25 & 26, 2017 we are going to be at booth 1314 with our new and all-time favorite gadgets.  The hours of the show are: Saturday 10-6, Sunday 10-5.

February 23, 2018
Project: APA102-2020 MicroNova Custom LE...

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart