The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles.
Features
Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion.
The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.
As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.
As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.
Specifications
Intermediate skill level - ages 12+
Basic soldering and tools required
Solar powered - no batteries needed
1-2 hours build time
Kit includes
• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Today we have a rainbow of colorful stuff, which apparently doesn't look anything like it at the moment, but believe me, it is. eSun 1.75mm PLA filament - 1kg Spool $30.00 1.75mm PLA filament for 3D printing. PLA is an excellent general purpose filament with a great finish, very rigid and biodegradable. eSun 1.75mm ABS […]
Wheee! It's finally outta my hair - the Sumovore PIC Brainboard now available to all you microcontroller fans that insist on programmable robots. Complete with a 5 pin and RJ11-6 port, you can use practically all PIC programming tools and hardware (or build your own programming cable as detailled in the instruction) to put your […]
The new S2 Scribblers from Parallax are in, and they feature a couple of cool new features. First: They're Open-Source! Yup, they've opened up all the design files to make hacking oh-so-much easier! Secondly, it's using the Parallax Propeller chip now, for mucho-improved computational power. They're already out of stock at Parallax, so get them […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.