New Product: The Solarbotics Paris Flyer...

Solar botics
June 19, 2018

The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles. 

Features

Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion. 

The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.

As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.

As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.

Specifications

  • Intermediate skill level - ages 12+
  • Basic soldering and tools required
  • Solar powered - no batteries needed
  • 1-2 hours build time

Kit includes

• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:

  • 1 x KMSE PCB
  • 1 x 0.2F capacitor
  • 1 x 22uF capacitor
  • 1 x Diode
  • 1 x MCP112-195 voltage trigger
  • 1 x TR2222 NPN transistor

MORE POSTS

October 18, 2004
Transistor turns 50!

Well, 50 years ago today, the Regency TR-1 transistor radio was unleashed on the masses. As the first transistor-based radio on the market, it made a splash. And here we are, 50 years later, making robots out of the same technology. Regenchy TR-1, Solarbotics salutes you!

January 10, 2018
Special Gift Ocarina Box

Now that the season of mass gift giving is (temporarily) over, publishing the details on this special gift ocarina box for a wedding anniversary will not ruin a surprise. So I figured I'd share this personal project that uses simple but smart electronics. First I soldered an interrupter switch to the SuperFlex LED Strand with Battery Pack in color purple. […]

October 23, 2009
Protoshield, FTDI Breakouts, GM10s IN ST...

Alriiiiight. It's Friday, and you know what that means... We get to sleep in tomorrow morning! WOOOOO! Also, it means that it's time for the weekly news post of new product goodness. Today we've got four items to show off: Freeduino SB-Protoshield FTDI Basic Breakout (3.3V) FTDI Basic Breakout (5V) Designed particularly for the Freeduino […]

July 4, 2014
Friday New Product: Metric Hardware

It's another Friday and we are back with the product that makes sense - it is metric! It is not measured in twips, poppyseeds, barleycorns, yards, furlongs, or any of this funny stuff. It's your good old straightforward decimals. Metric 2.5mm Hex Nut - 25 Pack $4.00 Metric M2.5 Hex Nut, in packs of 25, […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart