The Paris Flyer CarouSol Kit is the latest product in our line of solar-powered kinetic desk toys. Borrowing design elements from the golden age of air travel , we've added our unique solar-electronics flair to create self-powered dynamic mobiles.
Features
Designed as either a desk-mounted device, the Paris Flyer features wonderful visual detail when stationary. The periodic motion catches the eye, separating it from any standard mobile. The brass pivot rests on a low-friction metal disk for best motion.
The Paris Flyer uses our tried-and-proven SolarEngine technology that allows the use of solar energy in much lower levels than otherwise possible. Under standard office-level illumination, the hanging mobile version activates approximately every 4 minutes. In direct sunlight, activation is every 5~10 seconds, resulting in continuous motion from the mobile.
As a kit, the builder has an enjoyable experience assembling a precision-cut wood model, with the additional challenge of soldering the SolarEngine together. Being wood, it readily accepts almost any finishing method from lacquer to marker.
As with all Solarbotics' kits, it comes with the "No Fear" warranty. We guarantee the successful completion of your project, regardless of issue.
Specifications
Intermediate skill level - ages 12+
Basic soldering and tools required
Solar powered - no batteries needed
1-2 hours build time
Kit includes
• 4 x Laser cut MDF panel
• 1 x #4-48 plinth & screw
• 1 x 3/4" ball bearing
• 1 x Aluminum spinning surface
• 1 x Double sided sticky tape
• 1 x Propeller
• 1 x Pager Motor
• 2 x SCC3733 solar panel
• 2 x 13” long 30awg wire
• 1 x Solar Engine:
What's new at Solarbotics? We've just released our Sumovore Baseplate Upgrade Kit which will let you replace the mounting tape & zip-tie restraints with a black powder-coated steel baseplate! This upgrade makes the Sumovore much more robust, and also increases the mass for a more competitive edge. Note that all new Sumovores from Solarbotics will […]
Greetings my fellow humans! And salutations to my not-so-fellow alien amigo! There are a few small tidbits of news this weekend: First, we received our shipment of new Herbie PCBs! Hurray! This means that you can now get Herbie the Mousebot in all four colours - red, black, blue or white. They're all in stock, […]
Hi there forks! We hope everyone out there is enjoying their first week of summer. School is wrapping up, the sun is out, and WATCH OUT, A FREAK SNOW STORM! I kid, I kid. But this is Calgary, so you never know. Over the course of the next summer months we're aiming to roll out […]
As of June 7, 2017, Active-Tech Calgary is now under the ownership of Solarbotics Ltd.! Solarbotics has been a part of the Calgary DIY Electronics community for over 22 years, manufacturing and reselling the kits, parts and pieces you use for your own creations. Active-Tech Calgary has been around slightly longer, supplying industrial electronics & […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.