Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
New Product: Sensors
Solar botics
August 31, 2016
|
Seeed Grove - IMU 9DOF V2 $18.23 The Grove 9 degree-of-freedom (DOF) module features the MPU-9250, and is an easy-to-use all in one module from SeeedStudios. |
 |
Teensy Prop Shield LC $13.00 The Prop Shield LC is the stripped-down version of the Teensy Prop Sensor Shield (motion sensors removed) |
 |
Prop Shield With Motion Sensors $27.00 The Teensy Prop Shield is a wonderfully full-features sensor add-on for Teensy (and other) microcontrollers, featuring 11 sensor inputs, audio amplification and 8MB extra memory. |
 |
Adafruit ALS-PT19 Analog Light Sensor Breakout $3.50 Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs RoHS compliance. |
 |
1.77mm Nickel Plated Steel Spring Tubing $3.50 1.77mm (.07") diameter nickel plated steel spring tubing for stiffer tactile sensor designs |
MORE POSTS
Strange set of Atmel '328 ICs...
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
Holiday Shipping
Another year has snuck by, and here we are on the cusp of another winter holiday season! If you want to give a Solarbotics Kit (and we hope you do...) to somebody special this year, you should be aware of our shipping deadlines. It's not recommended to use ground shipping now (which can take up […]
Solarbotics at RoboMaxx, Robothon
We're making the trip out to Robomaxx in Grants Pass, Oregon October 11-12. Gonna be there? Hunt down the dude in the cowboy hat wearing the "Solarbotics" Shirt. That'll be me. Maybe I'll have samples of our gearmotors burning a hole in my pocket. If it isn't me, tell him to give back my hat […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.