Some of our favorite vendors reduced their offerings in thermal paste, so we searched out replacement inventory. We came across GD-2 being reviewed as a cost-effective alternative to more premium thermal pastes. So we've brought in some stock in 1, 7 and 15gram volumes. At 7.5W/MK, it's almost twice as effective as our budget thermal […]
New Product: Motors & Driver
Solar botics
July 18, 2016
|
28BYJ-48-16 16:1 Stepper Gearmotor $5.85 Originally designed for control of HVAC vanes and similar low-demand equipment, these stepper-motor gearboxes have lots of hacking potential. This is the lower torque / higher speed 16:1. |
|
28BYJ-48-64 64:1 Stepper Gearmotor $5.85 Originally designed for control of HVAC vanes and similar low-demand equipment, these stepper-motor gearboxes have lots of hacking potential. This is the higher-torque / lower speed 64:1 version. |
 |
Stepper Motor with ZT-ASY-00101 Wiring Harness $25.65 This Nema 17 Stepper motor offers substantial holding torque at a low 2.8VDC. It's the same model as used in the Openbeam Kossel 3D printer. |
 |
ULN2003 Stepper Motor Driver Board $3.25 Based around the ULN20003, this tidy driver board is specifically designed to drive smaller unipolar stepper motors. |
MORE POSTS
Ringo - the great-grandson to the Photop...
We were pleased to see the Kickstarter for Ringo, the Photopopper-ish but much smarter version of our own ~17 year old design robot kit. The video showcases some pretty cool behaviors, and is easily one of those projects where we think "Jee, why didn't we do that?"
Updated Minisumo/Linefollower code
Fixed a reset problem in the sumo code, turns out the a If...Then statement does not store its location on the stack. Ergo the return instruction at the bottom of the turn function was pulling a random location. Anyway a change from a return to a goto and everything is shipshape, savvy? Then download the […]
3D Printer Training - Creality K2 Plus
The K2 Plus builds on the existing firmware created for the K1 series. As such, many features are similar. This document outlines the new features and differences. Mechanics Software / Interface Creality Filament System (CFS) Creality Print - Configuration Although there are some excellent slicers, we suggest starting with the Creality Print slicer, from the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.