Spring this year seems to be short on sunshine. To compensate for that, today's post is full of shiny things. And butterflies. Butterflies are always a good addition. Tilt Beam Flashlight Cute build, a diffuser of some sort would be a nice addition though, unless used for interrogation purposes. (by [Zach DeBord], via Hackaday) Soft […]
New Product: LED Strips
Solar botics
May 2, 2017
A brilliant selection of new smart LED strips with various features. They are addressable, white RGB, or full-color RGBW, available on spools or per meter to add blindingly bright effects to your project. Some so bright, we had to shoot them at 1/4 power to avoid freaking out the camera exposure.
|
5V RGB Addressable Serpentine Stripxel (48/M, 2.5M spool) 64.95 CAD / 49.95 USD This strip uses narrow 5mm construction using a little "S" bend between each LED, you can peel the backing and stick them down into actual curves that don't kink out. |
 |
5V StripStar Addressable WHITE ONLY 144/M LED strip 79.95 CAD / 59.95 USD This strip allows you to pack a very dense, accurately controlled illumination strip into a project that lets you feature incredibly smooth, fast effects. |
 |
5V Addressable RGB Stripxel LEDs (60/M, APA102, Black PCB) 34.95 CAD / 26.95 USD These addressable RGB stripxels feature the APA102C LED elements mounted 60 per meter, on a black PCB. This model is cased in a silicone IP65-compliant sleeve for good water resistance. |
 |
5V RGB Addressable LED Stripxel (60/M, WS2812B, White PCB) 32.95 CAD / 24.95 USD The venerable WS2812B is among the most used and well-supported addressable RGB strip LED. 60 LEDs per meter on white PCB, IP65 water resistant. |
 |
5V RGB Addressable LED Stripxel (30/M, WS2812B, White PCB) 22.49 CAD / 16.95 USD Similar to 60554, but featuring 30 LEDs per meter on white PCB, IP65 water resistant encased in a silicone sleeve. |
 |
5V RGB Addressable LED Stripxel with white (30/M, SK6812RGBW) 23.95 CAD / 17.95 USD For true white color rendition with an LED strip, you need to include a separate white LED from the other red, green, and blue LEDs. Like this one, using the SK6812 RGBW LED. |
MORE POSTS
Sumovore with Bad Attitude?
Has anyone else have reports of attitude problems with the Sumovore?
Lulzbot 3D Printer Documentation and Res...
Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Friday New Products: Microphone Accessor...
New product for your attention: Electret Microphone Breakout $7.95 Audio sensors & mics have to be amplified just right for best response. Here's a tidy unit engineered by Sparkfun to make adding an electret mic to your project easy. MEMS microphone board $9.95 Newer MEMS microphones give much better response than older style electret mics, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.