The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!
So today we have a nest. And some other things, like a programmer. If you take the programmer you can program the cleaning wire nest and the code will travel through all the little coils and come out the other end all transformed and golden too. It's almost like enlightenment. And then it will suitable to enlighten the red-green LED too.
Brass Tip Cleaner $4.17 Awesome curly brass cleaning wire for all your soldering needs! |
|
USB AVR programmer $19.95 The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel's AVR microcontrollers. |
|
PJRC Teensy USB Board, Version 3.1, w/o Header Pins $19.00 Yay for 8 bit microcontrollers! Um.. I mean 32-bit microcontrollers that pretend to be 8-bit controllers, but kick their butt! That, in a nutshell, is the awesomeness of the Teensy 3.1! |
According to some scientists, you can tell what a person is by analyzing crumbs content in their keyboard. You can tell a lot if they don’t have a keyboard at all, or have two. Now if you connect the programmer to your keyboard via USB cable you could probably reprogram your crumb content as well. Identity hacking at its finest!
Now the last but not the least, we have two things to announce. First, holiday hours. We are going to be closed... for not that long! Exactly these dates:
Second, here are the shipping cutoff dates:
So make sure you take these into consideration if you are looking to make some last minute purchases!
The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it: Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ […]
Engadget has a large (albeit short) video of the new RoboSapien V2, and a bit of the Robopet. Check it out!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.