Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
New Product: Grove, More Grove & Ko...
Solar botics
October 6, 2015
|
Seeed Grove - RTC $6.90 The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date, month and year information. |
 |
Nidec SMD Vibra motor 1.3V DC, 105mA, 9500rpm $3.00 Surface-mount vibrating pager motor 1.3V DC, 105mA, 9500rpm. |
 |
Grove - Voltage Divider $5.90 The Grove Voltage Divider provides an interface to measure external voltages without the need to create a resistor ladder. Voltage gain is adjustable using the onboard switch. |
 |
Kossel Pro 3D Printer Kit with HBP $1750.00 Fast assembly, automated z-leveling, heated bed platform and full metal hot end are just a few of the things that make the Kossel Pro one of our favorites! |
 |
Grove - MOSFET $4.95 Think of a Grove-compatible relay with no moving parts! |
MORE POSTS
Chug-O-Meter Celebrating Arduino Day �...
Isn’t it nice when you can hit two birds with one stone? That’s exactly what we’ve done as we approach both Arduino Day and Saint Patrick’s Day with our version of the Chug-O-Meter! We absolutely loved what the circuit.io team did with their Chug Meter but thought that we could add more to its survivability […]
Project Mon(Tues)day: Pinewood Lowrider
Jerome, our squiggly-bearded intern from many moons ago that created the BeetleBot, just pointed us towards this totally pimpin' pinewood derby car. The author from sliptonic.com shows how he made his sweet lowrider with hydaulic(esque) action by using a small micro-servo for each wheel, an Ardweeny for brains, and a 9V battery for power. The […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.